When You Love a Man With Low Self-Esteem

Thanks! EDIT: Something I always sudo apt-get install samba --install-recommends. $ sudo yum install -y samba $ sudo systemctl enable smb nmb 2 Port Open port with using ervice file of firewall-cmd. x firmware for which most prior threads mention. Samba basically allows Unix systems to share files and printers with Windows so that in spite of their differences, these two systems can peacefully exist. 22. keytab This has saved the smb. The restart option is a quick way of stopping and then starting Samba. d/samba restart should be all you need to do. conf file): Unable to connect to Samba share from virtual machine without restarting smb The following is the output of systemctl status smb right systemctl restart smb. Hello, I installed the samba package and enabled the smb service to start on boot. It allows for file sharing across both Windows and Linux/Unix operating systems and leverages the SMB (Server Messaging Block) and the CIFS (Common Internet File system) protocols to seamlessly share resources in a network. Yum, being such a great tool, will automatically install any dependencies needed for Samba. Accessing Samba Shared Folder From Windows. Follow the smbpasswd chat to change the Samba password for this user. Note: Just hit enter twice to set a blank password, or set a real password. service; Thats it! Enjoy samba shares on Linux and Windows from a fresh, moowing F18 system. I tried using dpkg reconfigure samba, but it made things even worse, and now my ubuntu computer's hostname stopped existing. [shared] comment = Public Stuff path = /opt/shared public = yes writable = yes valid users = marc write list = marc Step 4 – Restart Samba Service. You should see output similar to the following: Smb 0:off 1:off 2:off 3:on 4:off 5:on 6:off. service not necessary when setting up a Samba. 1 service in opensuse 13. service Job for smbd. My Linux is FC4 64-bit on a HP dx5150 machine, running Samba. Under CentOS 7, I am running a SAMBA server. Now restart Samba (rcsmb restart) Now set a users password by changing to that user (su<username>) and typing smbpasswd <username><enter>. conf changes. [hide]. In this tutorial Samba fileserver setup on Ubuntu 16. Here is how you can install and configure samba so you can share a local printer on Linux with Windows: 1. We have done the simple configuration, let us get Samba up and running. Fedora - instructions were written with Fedora Core 4 in mind but should apply to all versions; Packages needed : openldap-servers (contains migration utilities used in this document) fedora-ds (the directory server via yum install fedora-ds) samba, samba-client, samba-common (samba server, also provides schema needed for storing samba information) Restart Samba on the Linux box with this command: /etc/rc. d/winbind restart. Configuration. or /etc/init. d/iptables restart ; Either one works. x the file locations may not be the same as those in v4. d? Would the following work? # sudo restart smbd # sudo restart nmdb. Move to PC directory in explorer, Select "Map Network drive". Find more guides like this in… We are using Samba 3. Contents. After the installation is done, we have to make some changes to the Samba config file, /etc/samba/smb. d/samba restart In RPM based distributions like RedHat, Suse, CentOS, Fedora (as root): service samba restart or maybe service smb restart Extra commands . install dan set up Samba linux[Redhat Enterprise(RHEL), CentOS, Fedora] Setting up Samba “can” be complicated at times. S : (1) also check if firewall allows samba connections, i. To enable it, you must modify the file swat located in /etc/xinetd. jsprenkle. d/samba does not exist, look for a script named smbd in the smbd (popular abbreviation for samba daemon). Open Nautilus and go to File -> Connect to Server. This time, mapping to \\192. Restart Samba : # /etc/init. 0 Author: Falko Timme Follow me on Twitter. · Open the firewall for use of cockpit  First we choose to set up a samba server on fc15 ( Fedora 15)! [root @ localhost ~] # chkconfig smb on ← Set Fedora Samba to start automatically ١٠‏/٠٦‏/٢٠٢١ Save close the file. ) Click on Restart Samba Server to activate all the changes you've made. Linux system can also browse and mount SMB shares. d/winbind restart Verify krb5. See Configure to Use SMBv2/SMBv3 on Smaba Server. [root@host ~]# yum -y install samba samba-client samba-common. I am fairly new to Linux and VERY new to Samba. Save the changes and return to your Samba Share Manager screen. Samba and Windows shares can be easily accessed from the default file managers of both Gnome and KDE. I've been pretty successful with my latest go-round but I seem to have forgotten a command that I used a while back. … If winbind is used, start and test  ٢٩‏/٠١‏/٢٠٢٠ How to disable the SMBv1 protocol in your Samba server on a Linux then you need to restart the Samba Service with the following command:. sudo /etc/init. With the configuration file we've done before, you've to create the directory To configure Samba to start automatically when you start Linux, use this command: chkconfig -level 35 smb on. Loading Gnome GUI and the Samba sharing config utility, when enable or disable a user to a sharing, samba restart and the open files by smbusers in this moment are closed. Step 4 – Back in the Terminal window, enter: sudo reboot, and Linux Mint will restart. conf file): Unable to connect to Samba share from virtual machine without restarting smb The following is the output of systemctl status smb right The restart option is a quick way of stopping and then starting Samba. It can be run on a UNIX-like platform like AIX, BSD UNIX, Linux, IBM 390 and OpenVMS. In order to allow Windows user to access and grab files from your Linux Fedora Core system, you need to work on Samba server. ١٩‏/٠٨‏/٢٠٢١ Restart smbd and nmbd. # service smb restart. With the help of samba-tool interface you can directly manage domain users and groups, domain Group Policy, domain sites, DNS services, domain replication and other Mar 05 20:40:26 localhost systemd [1]: nmbd. service sudo systemctl restart  The step by step guide for the mounting of remote samba share on CentOs/Fedora/Redhat system. カテゴリ: samba, 201606, fedora-24, en. [msh@localhost ~]$ sudo systemctl enable smbd. x/Ubuntu 16. Samba, as described by their official website is: “Samba is the standard Windows interoperability suite of programs for Linux and Unix. Set your share folders. In this tutorial, we will learn how to install samba and file sharing in samba. This user must be exists in Linux. Alternatively, to configure the Samba service using the GUI  ٢٢‏/١٠‏/٢٠١٨ Start with Fedora 28 Minimal and then make sure it is up to date · Now install everything you will need. sudo systemctl restart smbd nmbd. I have googled for a few hour. I think the problem is similar to this (I also used nearly the same smb. e. $ sudo pdbedit -a <user> new password: retype new password: -t option reads password from stdout. sudo  ٠٣‏/٠٥‏/٢٠١٨ I've followed the tuits, but when I go to restart samba with the sudo /etc/init. Whether Samba is already installed on your RHEL, Fedora or CentOS setup, To start with, you must gain root privileges with (give the root password,  RESTART THE SAMBA SERVER. To use SWAT, \ # connect to port 901 with your favorite web browser. Predictably, clicking it will kill all running server processes and re-start them, forcing the current configuration to be reloaded. Mar 05 20:40:26 localhost systemd [1]: nmbd. Keep on samba service on during booting time, samba service will start if server restarted. First of all, install Samba on the Ubuntu system :: sumit@hal9001:~$ sudo apt install samba. service smbd restart. Now restart samba service. After the reboot launch the terminal again and switch to the root user. On a Windows computer that is in the same  ٣١‏/٠٣‏/٢٠٢٠ Then issue the following command to start the smbd and nmbd service. conf. The directory must exist before it can be configured in smb. From a terminal prompt enter: sudo apt install samba That’s all there is to it; you are now ready to configure Samba to share files. All going well, you should be able to view and work with Windows SMB shares without any problems. service iptables restart /etc/init. Stop. d/init. This is the most reliable way to make configuration changes take effect after editing the configuration file for Samba. I also enabled the services but in vain. When configured, this server software allows the host machine to share files and printers and make Set your share folders. 0. So if you are using NetworkManager I would suggest two things to try: - Click on "Manage connections" in the networkmanagement applet, edit your connection and set it to a "System connection". $ sudo firewall-cmd --add-service=samba --permanent $ sudo firewall-cmd --reload 3 SELinux Enable access to home directory without samba_share_t label. Create a Samba client credentials file. This feature is often accessed with a SIGHUP signal or via a control program. conf and restart the smbd and nmbd daemons, as well as running "smbcontrol ALL reload-config" Unfortunately Windows machines with SMB1 client services still enabled still use SMB1, according to the output of a 'get-smbconnection' Powershell command. Especially if you are looking for instructions online where there are WAY too many tutorials which go in to details about what configuration does what, etc. Also check that the script /etc/init. . service Samba is the standard Windows interoperability suite of programs for Linux and Unix. d/swat by setting no in front of the disable option as : # default: off # description: SWAT is the Samba Web Admin Tool. This quick post shows how to restart Samba Service on Ubuntu. To restart the Samba and Winbind service, you may execute the below commands, service smb restart service winbind restart. sudo systemctl start smb nmb. restart cifs. $ setsebool -P samba_enable_home_dirs on This article will not use… Fedora 18 Samba Standalone Server With tdbsam Backend. Restart smb and nmb services of your system. 3 Samba is an open source, free software suite that provides seamless file and print services between Windows clients and UNIX-like platforms. These may be installed as standalone full versions of Fedora or as add-ons to existing Fedora installations. d/samba restart. 168. Now you will required a directory to be access with samba. 6. The log shows periodically: change_to_user_internal: chdir_current_service() failed! The service doesn't necessarily fail, but becomes slow and unreliable. Restart. However, today I found out that even after setting up MX Linux’s Samba correctly (see below), if none of the computers on my windows network runs “Computer Browser”, my Windows computer name will not show up in “Thunar File Manager” although I can access it with smb://, and linux computers running Samba server shows up fine. Network drive is mapped to samba share directory. Step by step configure and using SAMBA server on Fedora using system-config-samba configuration tool. Running. Mint 18 does not install samba ( the server part ) by default so you need to install it yourself. Also enables to automount shared drive even after system reboot. service swat { port = 901 socket_type The first step is to install the samba package. 1 64 bit I think there is not openSUSE way for doing it, since the version of samba 4 included in openSUSE can not be configured as an AD DC, so you have to compile from source. Re: start, stop and restart samba 4. Note that the restart option starts the daemon even if it was not running originally. 1/6/5. Install Samba. conf file, and the changes necessary to fix the Samba issue. Please note that this can be done whether the server is a Windows machine or a Samba server. To install Samba on Ubuntu, simply run the following command in terminal. $ sudo useradd -m <user> This article adds <user> with pdbedit. txt. It won't add the -s parameter and will open up all the samba ports 137 - 139 and 445 which is not a recommended scenario. If Webmin detects that Samba is already running, a button labeled Restart Samba Servers will be displayed at the bottom of the page. This will give you a list of all the services Fedora 19 Samba Standalone Server With tdbsam Backend. -----Update Information: Update to Samba 4. 1. To restart smb do the following. Samba is the utility for file and printer sharing for both Linux and Windows operating system. systemctl enable smb systemctl start smb Setting up Samba Credentials Restarting just the service seems like an improvement on rebooting. ”. ) Open up a virtual terminal if you're running X windows or log into your Samba Server if you're running Webmin remotely. So by setting up our Linux VM as a Samba server, we can connect to that from our Windows system easily. Now save the file and start samba services. You can also just restart the server if you want to as well. Test the smb. Also you have to set your desired host name using the command hostname YOURHOSTNAME. conf configuration file with vi or vim text editor, type: You can restart all samba services by the command service samba_server onerestart or restart the service in question without the 'one' prefix. conf file. Screen below will appear prompting you to accept the installation processes by typing Y the click ENTER. The Samba server can be defined as one of the most powerful servers in Linux that enables us to connect various resources like printers and files with several operating systems. Create your Samba user and a password for it: $ sudo smbpasswd -a tux. service is masked. ١٦‏/٠٤‏/٢٠١٩ Dengan samba berbagi file antar Linux, Windows dan. The main Samba configuration file is located in /etc/samba/smb. After a successful restart of the services, you should go to Network in your Windows Explorer to find your Linux system 🙂. $ sudo yum install samba 2. 2. In fact this should apply to more or less any service in Ubuntu. Then restart smbd: Code: Select all. Enter your password at the prompt. Level 1. Configure samba - Edit following section in your smb. When in doubt what services are running try this: service –status-all. Install samba - Use yum to install samba for your Fedora release. I stared at the Archwiki till my eyes bled, and learned a lot about Samba just from looking for this one command. You can specify a log directory to use with the -l flag on the command line when starting the Samba daemons. Samba is freely available under the GNU General Public License. service failed. This tutorial explains the installation of a Samba fileserver on Fedora 19 and how to configure it to share files over the SMB protocol as well as how to add users. For me (on ubuntu server 12. Let’s get the packages installed first: yum install samba. # sudo dnf install samba For Fedora. d/samba exists. Notice how we are using the -y flag once again to auto-confirm the installation prompts. If you have any queries and problem please comment in comment section. Introduction to Linux restart. If you want to enable SMBv2 or SMBv3 protocol on your Samba server, you need to edit the configuration file of smaba server, it is located in /etc directory, and it is called smb. It will not affect the operation of the share. If mapping network drive, windows 10 will connect to samba automatically when user login. d/smb restart; In Windows Explorer, doubleclick on Network Neighborhood, then on Entire Network, then on your workgroup, and see if you see your Linux computer. Create the user in samba. Just so, is Samba running Ubuntu? Samba is included in most Linux distributions. after that sudo systemctl restart smb. Finally, go back to the main screen and click the Restart Samba Servers button. If user to be added by pdbedit does not exist, you need to add user with useradd. a. Setup and configure NIS server and NIS client on Fedora Core Linux Automatically start samba service after boot on runlevel 3 and on the runlevel 5 . tagPlaceholder. I have enabled all Samba ports on the Fedora software firewall. ٢٢‏/٠٢‏/٢٠١٤ apt-get install samba cifs-utils smbclient. Fedora 19 Samba Standalone Server With tdbsam Backend. sudo smbpasswd -a pubshare Change the owner of the share to the user just created sudo chown pubshare /data/shares/public/ Restart Samba and connect to your share from another system. See full list on fedora. su Password: # /etc/init. 3/6. by kato181 » Wed May 05, 2021 4:10 am. sudo ufw allow samba Fedora 34 : Samba (01) Fully Accessed Shared Folder (02) Limited Shared Folder (03) Access to Share from Clients (04) Samba Winbind; Sponsored Link. This guide covers creating a shared file location on a Fedora machine that can be accessed by other computers on the local network. RESTART THE SAMBA SERVER. service nmbd. Add user access to samba with pdbedit. systemctl restart samba has resulted in very slow service restart Fedora - instructions were written with Fedora Core 4 in mind but should apply to all versions; Packages needed : openldap-servers (contains migration utilities used in this document) fedora-ds (the directory server via yum install fedora-ds) samba, samba-client, samba-common (samba server, also provides schema needed for storing samba information) Step 1: Install Samba Packages on Rocky Linux 8. This utility is purposefully required when there is a need for a system to post some major updates like network or drivers. service [sudo] password for msh: [msh@localhost ~]$ sudo systemctl start smbd. 04 LTS Linux: $ sudo systemctl restart smbd. , Firewall > Persistent Configuration > check on samba. ** it’s a need to open firewalld for share for samba, ans make sure /etc/samba/smb. sudo service smbd restart. It implements the server message block (SMB) protocol. But unless I’m blind (and I probably am now) they don’t list that command on the wiki for some reason. Samba can share Oracle Linux files and printers with Windows systems, and it enables Oracle Linux users to access files on Windows systems. service; systemctl restart nmb. and see if something happens while you try to connect to the Samba share (restart smbd). I've added "max protocol = SMB2" to the global section of smb. conf file and display the locations where it is found by issuing the following command from the SSH command line (when logged into the My Cloud via SSH): RESTART THE SAMBA SERVER. 1) If you add a new user to the system, don’t forget to convert that user to a Samba user. P. 1 Install Samba; 2 Start Samba  ١٥‏/٠١‏/٢٠١٤ Install Samba on Linux System to Access Linux Partition on Windows sudo dnf install samba ## Fedora 22+ systems sudo apt install samba  ١٤‏/١١‏/٢٠١١ Why isn't there a samba directory in init. Installing Samba. The problem I have is that smb fails to start automatically, but if I restart it it works. There are a few things you should remember. Create a system account for authentication to access samba shares. Samba uses the TCP/IP protocol that is installed in the host server. 21. Use swat \ # to configure your Samba server. If /etc/init. If it does, check to see if restart is a valid argument to it. sudo service smbd restart . Just do the following steps to edit it: Step1: open /etc/smb. This window provides a graphical interface for configuring the  Step by step configure and using SAMBA server on Fedora using The command example below show the step by step to restart the Samba Server. # sudo apt install samba For Debian. Login to your Rocky Linux server, open terminal then run the command bellow to update the Linux system. 3 Get Samba Up and Running. Create the share folder: sudo mkdir /your-share-folder. To start a Samba server, type the following command in a shell prompt while logged in as root: /sbin/service smb start  On CentOS 7, Fedora, RHEL, Ubuntu, and probably Debian, the process is almost identical. service smb. I am using Kali linux and I too, had to use samba instead of smbd – GaurabDahal. 67\share. Start. In the background smbpasswd will launch the passwd program specified and follow the passwd chat to change the UNIX password for that user. Let’s also start and enable Samba on system start while we’re at it. 11. Alternatively, you can restart by issuing the middleware command to do this midclt call service. Hi all. or /etc/rc. 3-0 - Update to Samba 4. In this article I am going to explain how you can mount SAMBA file system (SMBFS) permanently in Linux. The restart option is a quick way of stopping and then starting Samba. sudo service smbd start. The default configuration file has a significant number of comments in order to Because your using firmware v2. Step #7. 4 Answers4. All Samba accounts for regular users are added and managed through smbpasswd. mkdir /opt/shared Add below entry in Samba configuration file /etc/samba/smb. Post. Install dan Konfigurasi Samba di Fedora 30 lalu restart samba. Create User for Samba. Choose “Windows share” from the listbox and enter the server name or IP address of your Samba server. conf ** Setting Samba Service (Applying Real Service) samba => Create a samba-specific account. Even better still is to make use of the config reload that comes with many linux services, including Samba. Editor's notes: I can't comment, or this would be a comment to the above answer. If I restart the Samba manually (rcsmb restart), so it works in nautilus This was written for Fedora but it applies to openSUSE and will  ٠٩‏/١٠‏/٢٠١٩ Encontramos la solución a “Failed to start Samba SMB Daemon”, en las distribuciones Red Hat Enterprise Linux, Centos y Fedora. - Switch to "Traditional method with ifup" in YaST->Network Devices->Network Settings->Global Options. Samba configuration file is located in /etc/samba/smb. As such using SSH you can instruct the OS to search for the smb. [jhealy@Jadelinux ~]$ su r/Fedora - Is starting nmb. sudo service smbd stop. See – Linux Samba Server On this course we were given a task to install Samba -server on Ubuntu Server and try to implement it to be in use for Windows as well. Top. Automating Mounting With Linux SAMBA Clients. Your users should now be able to access the shares on that system. It looks like ubuntu has changed the name of the service you need to restart to smbd. Mine looks like this: $ sudo cat / root / smb-credentials. 3 - Security fixes for CVE-2019-14861, CVE-2019-14870 ----Restart winbindd on samba-winbind package upgrade-----ChangeLog: * Tue Dec 10 2019 Guenther Deschner - 4. Let’s start by creating a directory to be shared with Samba. d/smb restart /etc/rc. Linux restart is defined as a command which enables users to reboot or restart a Linux system. For the longest time, I thought that you had to 'systemctl enable nmb. testparm # Linux init systems based on sysVinit sudo service smbd restart # Linux init systems based on systemd sudo systemctl restart smbd. d/smb restart Shutting down SMB services: Shutting down NMB services: Starting SMB services: Starting NMB services:  Install and set up SAMBA File Share on Fedora. d/samba restart command, I get an error "command not found" ٢١‏/٠٨‏/٢٠١٢ This tutorial explains how to setup Samba Server Using tdbsam Backend on RHEL/CentOS 6. conf is present by default because it's used by the samba client and that is installed by default. Not seeing it yet? This has saved the smb. Restart the Samba & Winbind. Usually restart just calls "stop" and the "start" so you could try those manually if restart is no defined. Type in: “smbpasswd” username where username is a valid user on your samba Now any user will be able to access your Samba shares. This should bring up samba and install samba-common-tools as well. service Run the following command on Debian 8. We’ll begin with accessing shares from Nautilus in Gnome. Samba can be easily installed with the following command. If the global zone is being used for Samba. Restart samba. Since no one can help me with sharing files from Samba, how can I reset it to the defaults and delete any residual configurations from previous releases? Then, presumably, the GUI sharing would work after I reinstall samba. I hope this article will help to configure samba server on Linux/UNIX systems. This works on CentOS 7 and Fedora. Thanks! EDIT: Something I always I am fairly new to Linux and VERY new to Samba. A Few Tips. Step 2: Configure Samba share on Linux Mint 20. d/samba restart In Ubuntu: sudo /etc/init. ○ Fedora based OS Be sure to restart samba after smb. For Fedora 25, I am not familiar with fedora version numbers but I am with RHEL/Centos 7. note: You can use Redhat's system tool for editing the firewall, but it is not recommend. Samba is a free and open-source networking service that functions in a client/server networking model. x If you have selinux enabled by default, you might try as root setenforce 0 to temporarily put selinux into permissive mode until next reboot, see if this allows samba access to work. I ran across a command somewhere for restarting Samba services on Redhat 7. Samba AD DC can be managed through samba-tool command line utility which offers a great interface for administrating your domain. Install Samba by executing this command in terminal. service # Mounting Locally After setting up and restarting Samba, check your connection to the shared folder and create a permanent mount. No helpful post found. systemctl restart samba has resulted in very slow service restart How to start, restart & stop Samba from the command line? Sun, 2007-10-07 16:04 — peterv6 I've just switched from Red Hat to Ubuntu, and I need to know the commands to bring up, restart & stop the samba server. Create a samba account and manage it centrally through a single account. Step 1: Manage Samba AD DC from Command Line. To check if Samba service is running, issue the following commands. Re: How to restart Samba on Linux Mint 20. 25. Debian/Ubuntu $ sudo systemctl restart smbd nmbd CentOS/Fedora $ sudo systemctl restart smb nmb. Version 1. 15. Now you have to restart samba service In Debian (as root): /etc/init. Install samba using the following command: # sudo yum install samba For CentOS/Redhat. com After editing the configuration script, we will now restart the Samba file-sharing server on our Linux machine. Thanks:) Step 1: Install Samba Packages on Rocky Linux 8. The steps are as follows. 1 Install samba Install samba with yum. d/smb restart /etc/init. service smb start. 8 and Fedora 17,16,15,14,13,12 systems  Samba is a popular choice for a CIFS file server in Linux and Windows part of freeipa-server-trust-ad package in Fedora ( ipa-server-trust-ad in RHEL 7 . 1. systemctl restart smb. fandom. SMB Permissions Overview. samba. service smb restart. This tutorial explains the installation of a Samba fileserver on Fedora 18 and how to configure it to share files over the SMB protocol as well as how to add users. If you can’t find your Samba file sharing server on a local area network, ensure that the firewall is not protecting it on your network. Fedora Labs is a selection of curated bundles of purpose-driven software and content as curated and maintained by members of the Fedora Community. 04 and Fedora 25 is systemctl restart smbd nmbd # Ubuntu, Debian systemctl restart smb nmb # Fedora. 04) the correct command was. Side note: smb. Jul 29 '15 at 11:38 Cannot restart samba, samba. we can also automate the mounting of shares by placing entries in your /etc/fstab file. Samba is configured as a standalone server, not as a domain controller. It is the open-source software that is considered as the implementation of the crucial protocol: server message block or common internet file system. Assuming you want to mount your Samba scans on a Linux system, you need to do a few steps. Samba allows for Windows and other clients to connect to file share directories on Linux hosts. 2/6. To make sure that the chkconfig command worked right, enter this command: chkconfig -list smb. b. 16. Samba is an open-source implementation of the Server Message Block (SMB) protocol that allows Oracle Linux to interoperate with Windows systems as both a server and a client. conf at the bottom. For example: # smbd -l /var/log/samba # nmbd -l  su - /sbin/service smb start. Run the following command on CentOS 7/RHEL 7/Fedora Linux: $ sudo systemctl restart smb. 2. Enable auto-start at boot time. Recently, likely after some updates, has become a bit less stable. If you are using Redhat/CentOS/Fedora core type: # service smb restart  Starting and Stopping Samba. It was something like "service -? smb" or something like that. % cd /usr/local/samba/private/ldap % slapd-samba/start-slapd. Create a Samba user. Any changes made to this file requires Samba daemon to be restarted. #chkconfig smb on. To do basic Samba configuration, you can start with the Samba Server Configuration window. I have made some changes to my Samba config file, and I’m hoping someone here knows the command to restart the Samba service. sudo service nmbd start.

uz2 wiy nlp hux djk 8ia ruk k5d c6z jfa ult rib kbh xur qkn zjr 4y1 pj6 wui lqb